Overland Paper Towel Holder Installation Guidance

1. Prep the area you'd like to mount the holder by wiping away any dust or debris with a cleaning agent like an alcohol pad.
   
   
2. Next you'll remove the 3M label to expose the high bond adhesive being careful to not let it make contact with anything.
   
   
3. Now, you'll insert both mounts in your paper towel roll and leave a little wiggle room on each side.  This will allow for smooth operation and not bind against the paper towel roll.
   
   
4. Lightly place assembly in your desired mounting location and verify it is where you'd like.
   1. Once verified apply a bit of pressure to ensure that the adhesive backing plates are attached.
      
      
5. Carefully remove the paper towel holder from the newly mounted location, leaving behind the adhesive mounting plates.
   1. Then apply additional pressure to the adhesive mounting places individually to ensure full adhesion/attachment.
      
      
6. With everything all mounted up simply pull the shock cord behind the retaining hooks to access the paper towels...Once done unhook the shock cord to act as a keeper to prevent the paper towels from unraveling during travel or when the wind acts up.
   
   
7. This is the most important part…step back and admire your new ASG Offroad Paper Towel Holder, and prepare for your next adventure as All Systems are Go for Offroad!

Rev. 25.07.10